Trigger Mechanisms

Trigger mechanisms consist of an investment cast 316 stainless steel housing and beefy, 1/4 inch thick, laser cut 316 stainless sear and trigger.  Designed for easy shaft loading and smooth release.  Features a short trigger lever for easy installation into euro style rear handle guns.  Trimming of the trigger lever is not necessary.  For larger mid-handled guns, it is recommended that a remote trigger lever and push rod be installed to reduce the required trigger pull force.  Accommodates left or right line release placement.  Open bottom design allows removal of the trigger mechanism from the gun without removing side mounted line release.  The open bottom design also permits easy polishing of the sear-to-trigger sliding surface without disassembling, keeping your trigger pulls nice and smooth.  Accepts 1/4 inch to 3/8 inch diameter shafts with square trigger notch.   Maximum recommended safe trigger load is 800 pounds.  Trigger mechanisms have been tested to failure loads in excess of 1600+ pounds.

Price:   $80/each + shipping.      Includes side line release.

Home    About Us    Spearguns     Gun Gallery     Manufacturing    

Catch of the Day     Links    Order    Product Warranty/Disclaimer

Copyright©2007, Spear Diver.  All rights reserved.